Switch to "Minimal view" reset main menu language to English. Maximum texture resolution to "Desktop" not working with Haali. Better synchronization with EVR Custom to improve playback smoothness. Support of framestep backward, even if the codec didn't support it. DXVA decoder support multiple graphics cards. PCI vendor id detection on the fly. Incorrect aspect ratio for some H. AVI with H. Hang when moving player between monitors. This makes. Also gives more room in the bitvector for adding more decoders.
This cleans up all file associations,. This feature didn't work. Chapter message improperly displayed in status bar for file only. Crash with CoreAVC when changing "preferred decoder" setting. Missing checkmarks on "tearing test" and "display stats" options. MPC-HC file association cleanup bug rev. Remember position not working with some DVDs.
DXVA decoder now support H. Incorrect aspect ratio with some H. FFmpeg software decoding to use other decoder instead. Sorenson video was not played when DXVA was activated. Minimum EVR buffer set to 3 instead of 1. Reported subtitle fixes from Guliverkli2.
DXVA decoding bugs for some H. Memory leak in the DXVA decoder bug Some H. Black screen when OSD or subtitles was displayed in x64 release.
Incorrect colors on video when using YUV mixing. PN31 driver installation was not working. Ghost horizontal and vertical lines with Pixel Shader resizer.
Crash in FLV splitter with file containing 0 bytes packets. Button "Video" in format property page didn't select images anymore. No sound in some FLV video with Nellymoser audio track. YUV mixing is now disable with Vista. MPC-HC is now recognized as a registered media. File type registration now compatible with UAC Vista. Subtitle popup menu not working in French. Crash when opening "Navigation" menu while playing DVD.
Crash when opening zero byte length MP3 files. Crash when using "Save thumbnails" with number of row or column. G15 keyboard. FLV Splitter when video does not start with keyframe. Vulnerability in FLI internal source filter. EVR Custom Presenter rendering thread stability. EVR Custom Presenter doesn't need mfplat. Use same registry key like original Gabest Media Player Classic.
FLV splitter did not read width and height out of metadata. If more than one subtitle text rows shown, the background. Jitter test was not displayed with some files. Possible crash when closing file, while OSD was displayed. Mouse-click to play not working at the bottom of video. MKV internal subtitles were not displayed from time to time.
In this mode. Mouse cursor invisible in Fullscreen mode. Mouse-click to play was not working with some renderers. A one pixel width rectangle was not displayed around the video window. Window "flashing" during resize, after video loaded. Fixed bug at internal filter property page. Taskbar Display bug in D3D Fullscreen mode. Mouse cursor invisible in D3D Fullscreen mode. Aspect Ratio bug in D3D Fullscreen mode. Only additional.
The 'Position subtitles relative to the video frame' has three options. For it to work has you want, you have to click it until it is something like this: [v] At least in my system that's the how it works as it should. Hardsubs have to show up correctly always because they are encoded over the video and there's no way to disable it unless you crop or hide that part of the video.
Disable override placement, use 20 for all the margins values, put the subs on middle-bottom and full check the position box like "professor" said. Re-did those steps and still no luck.. I've uploaded a screenshot of my settings, if that helps. Why are black bars on the right and left of the video? Or all around the video? Since you seem to not be using the internal filters, did you try using only the internal filters? With those black bars showing with a normal window of MPC-HC in video, it seems to me it is either a bug in Windows 7, or a misconfiguration of one of the filters you installed if whatever filter you are using sends the video to MPC-HC with those black bars, I guess MPC-HC is seeing the black bars as the video frame, and putting the subtitles in it as it should in this case.
At least update to 1. It will be bit perfect if it matches your audio device settings. Yep, it's this one I believe it's fixed in the current master branch of sanear but it didn't get integrated into MPC-HC yet. Just in case you missed it. Actually now I'm not sure about the first one, maybe we can just forget it. As for third request, I just found a provider that have other than. Best bet is to open ticket at our trac.
I hope I could do that again as until now I can't create ticket or make post due to my ip flagged as spam. Will try again some time later. I accidentally installed the x64 version and chose to get rid of the configuration file during the uninstall process, thinking it was linked to that specific version, but it wiped out the settings for the x86 version as well.
Though I don't understand why it is there: Isn't the audio delay needed in non-fullscreen mode? Why is the audio delay bound to the display mode? I have 3 display devices connected to my video card, only 2 of them can be active simultaneously 'cause my video card is AMD and all display devices are connected legacy , 2 devices that are being swapped require different audio delays - I have no idea how to set up this configuration properly by the current means.
I should have thought to check there, aside from the AppData and Program Files folder. Is there any way to ensure that you land on a keyframe in MPC-HC aside from clicking on the seek bar? I feel like using the mouse is inaccurate and existing keyframes that are close to one another are missed. Never mind, I'm an idiot.
For some reason, I thought you could only frame step using the arrow keys. I also support this feature as it's also needed in my setup.
But I would prefer it if it could be used in conjunction with madVR's display mode switching. Edit: This is better a feature request for madVR. Settings are stored in registry in already mentioned key and are shared all MPC-HC instances you might run. You can however enable storing settings in. Audio delay can be set globally in audio switcher and has always been.
It is completely independent from display modes. New feature lets everyone to override default audio delay per display mode. We have received requests for this feature because some TVs have different input lag depending of post processing and refresh rate. While this could be done by some monitoring on current mode, it would be confusing what's going on. Now audio delay is set when mode is changed and I think this is easy to understand for users. But this is little bit not sure if video renderer should do that.
As I wrote in my ticket, some devices projectors have permanent input lag regardless of refresh rate. That's why I asked for the possibility to set not overriding but additional audio delay that should be summarized with the current global audio delay that is being set simply per device.
Can't you do that with LAV Audio set a global audio delay? I suppose you don't get what I'm talking about. I have 3 display devices connected to my video card: 2 "general" displays and 1 projector.
General displays don't introduce the input lag; the projector does. I watch movies sometimes on the projector, sometimes on the main monitor, sometimes on the second monitor. Now I'm forced to manually change the global audio delay depending on what device I'm watching the video currently on.
Of course sometimes I forget doing that; then I'm forced to stop the playback, go to the console if I'm watching a movie on the projector , exit fullscreen, change the audio delay What is more is that sometimes a movie's audio track requires the specific audio delay itself.
So I need to sum up the delays and set the required delay. It's not a big deal - but not to forget to clear this delay after watching IS. In short all this is a real PITA right now. I'd like to enable it for stereo sources, but leave it off for surround sound. Is there a better solution? Hello, is it possible to somehow load an image and overlay that on the video as part of a pixel shader?
The uniformity of my TV is not perfect; the left side is tinted very slightly red, in the middle there's a band that's tinted very slightly green, plus the usual faint clouding etc. So I had this idea of taking a photo of the TV displaying a solid grey image in order to create a sort of difference map from perfect, uniform grey, then load this image in a shader and use it to modify the corresponding pixel values to offset the variations of the panel.
Similar idea to the LCD angle correction shader but more complex than a simple ramp. Just wanted to check if anyone knew off-hand if this would at all be possible or not. AviSynth may be able to overlay an image in different modes, but not as fast pixel shader.
MPC-HC supports pixel shaders as rendering effects, but I can't tell you how to write one which applies a texture over a video. But it sounds possible to me, a kind of RGB offset texture, maybe in lower resolution and scaled up to the video resolution. You can use ffdshow for that. Come to think of it, you can also overlay a png directly with ffdshow. That's probably the most simple solution.
I was really hoping to avoid adding more stuff to the playback chain but I might try ffdshow, thanks for the tip. Had a look at some HLSL tutorials and from what I gather it doesn't seem like it's possible to load another texture in the shader code, rather it has to be passed as an input like the video texture. For example, I have many movies with deleted scenes or alternate endings in a separate video stream. However, the problem is the track duration and seekbar do not change accordingly.
So, for example, let's say Video Track 1 default video track is and Video Track 2 is So when I click in the middle of the seekbar, it tries to seek to an hour within Video Track 2 which is only 6 minutes long. MPC-HC then immediately crashes. It ought to seek to 3 minutes since that's half the duration of Video Track 2 but it doesn't because it still thinks the video track is two hours long.
I'd really hate to have to demux them all into separate mkv files because of this Multiple streams in containers like MKV are expected to have the same or at least a similar duration. What you are trying to do is not what having multiple streams in one container is supposed to be used for.
I would not expect your current files to improve, and I would honestly be surprised if any player handles that situation any different.
The file duration is largely independent of which track you currently selected. Interesting, well thanks for clearing that up! I'm glad I now know. I had spent hours trying to figure out what I was doing wrong I have been using it, but tickets like these are giving me pause. It's totally useless as far as I'm concerned. To add to that I won't be registering for the bug tracker, sorry, it's not convenient : a selectable buffer for WASAPI exclusive mode would be useful 10, 25, 50 ms, etc.
I thought it did, since ticking "exclusive" mode prevents anything else from playing on my system. That's not what I was talking about. I'm talking about it playing 2 channel as 2 channel, 5. Using exclusive mode and setting 2ch in windows speakers setup working fine until I play multichannel audio pcm, flac , then I have to manually configure the system setting again and back later on.
I raised an issue on github about making a new release. Until then, can somebody compile a new build from current master that we can try as an external filter? Yep, that's an issue with my setup as well. I've just built both x32 and x64 from fc7 master latest commit on Windows 8. It seems to be working fine with a quick test both x32 and x64 versions , use it at your own risk since it's not an official release. A tray icon will be present during playback where you can set properties.
And Wasapi Exclusive finally works as it should: no channel and sample rate conversion anymore. Post your feedback of its stability mention version and mode exclusive or shared then maybe our beloved devs will integrate this current version if it's working well. Also he said that he wouldn't want to integrate non 'stable' versions as "IAR". Very cool!! OK, understood, no worries. If somebody doesn't like the current internal one that can use the external one until then if it's working fine.
But, you should make an issue on github otherwise this feature will be never implemented. Okay, I'll create an account. Would anyone be kind enough to explain how LAV Audio's mixing option affects reference levels? I've got my stereo monitor pair calibrated to 85 dB for movies.
Since there is a significant difference increase in SPL when mixing stereo is enabled, which setting would actually give me reference level at 0 dB dB peaks on my preamp's dial? Enabled, or disabled?
Nvidia graphics card, H. Why is this happening? Driver bug? MPC-BE is working as it should. I think 2 and 7 are basically the same thing. Does not read the names from this variant playlist. In my country it's not rare variant such a playlist. I don't have Nvidia GPU to test it.
But it is likely we set something wrong for this case. Works fine for me. And I don't recall any changes that could break it. Are you sure it was working in previous builds? I see I can take a look at this, I think our playlist was designed to show filenames primary. You've probably not understood. Additional information sent a personal message. I gave little information to understand what I mean.
How about displaying movie info, e. I'm not too particular about exactly how and where that might be displayed, but it would be a great help selecting titles for viewing when you've got nothing particular in mind. I'd be happy to add this to the Trac if it might receive some consideration. Thanks for this great project. I get this:in the log folder: My build environment appears sane, I've since built nightly error free using the above three build steps. Or is there a subtle problem I've missed?
You probably need Update 2 for VS Worth a shot. Edit: That did the trick Take a file from another topic. Not displayed subtitle in this video. Player For this video need enable Internal Subtitle Render. Only choose in lav S: pgs is not enough. Hi, if madVR can use internal shaders, I think cache compiled shaders shouldn't be greyed out.
There's already a pull request for that. Right now it is picked up alexmarsev code with added settings window and some other tweaks. If internal splitter is selected it will be used even if there is other prefered filter. At least I think I need to double check that. Anyway if you think something is not working as it should feel free to suggest change and we may implement it : As for toolbar size, it was way too small for moderns resolutions and above all it wasn't called to dpi.
I think now it is little bit better. Anyway if you think something is not working as it should feel free to suggest change and we may implement it : disabling all internal filter to use external filters is quite some work compared to adding an external filter and setting it to preferred. As for toolbar size, it was way too small for moderns resolutions and above all it wasn't called to dpi.
Can anyone do anything about Trac not sending out verification emails? Can't submit new tickets or post comments until the mailer is fixed.
If I understand you correctly, you don't need it. The patch is missing an addition in FGManager. Easy to fix. Has anyone else noticed this? Odd, it's not working for me, it still follows the windows mixer settings.
Not sure how you managed that because you can't use bit filters in a bit program. Register sanea Sorry, I meant sanear In any case, I get the same result - it follows the windows in my case, realtek driver setting. The pull request is now updated with the fix. If you add Sanear to the external list and set it as preferred, it will be used regardless of what you choose under Output. So no, it's not the same, despite it being the same code though chros's build is newer.
Once you play a file, go to your system tray, right click on the Sanear icon and make sure "Ignore system channel mixer [ I couldn't get correct channel output working without the later checked. So I'm not sure what else to try. Is this latest sanear build part of the nightlies?
0コメント